Product Details
Discuss your application or request a sample
Make a broad range easy to choose
A useful product range helps buyers narrow their choices. Start with the machine interface and approved dimensions, then compare the fiber face, pile and backing. Group items by actual construction and attachment instead of mixing visually similar pads under a single description. This makes the catalog easier to use and repeat orders easier to verify.
Connect the pad to the polishing sequence
A wool pad is one component of a polishing system. Describe what the surface looks like before the pad is used and what must be achieved afterward. If another step is required to refine the finish, include it in the trial. This helps avoid selling a pad on the basis of an isolated result that does not represent the customer's complete process.
Recognize what the cream fiber face tells you
The product photographs distinguish this range by its cream-colored fiber face and center opening. They help identify appearance, but they do not establish a precise wool percentage, cutting grade or thread standard. Use a written construction specification to define the item behind the image, especially when preparing an online listing for repeat supply.
Application scenarios to evaluate
Use these scenarios to define a sample trial; suitability depends on the supplied specification and approved process.
| Buying situation | Selection focus | Trial objective |
|---|---|---|
| Consolidating workshop pad purchases | Which machines, sizes and constructions are actually used | Reduce ambiguous item descriptions before consolidating orders. |
| Building a multi-size distributor range | Verified attachment and intended process for each variant | Keep size and construction differences visible in the catalog. |
Specifications and selection details
| Nominal sizes | 4, 5, 6, 7, 8, 9 and 10 inches; custom sizes by inquiry |
|---|---|
| Product material | Wool; composition and construction to be specified |
| Construction detail | Cream-colored fiber face and center opening |
| Ordering details | Mounting arrangement, pile, backing, speed rating and pack quantity |
Select a specialist page for a specific requirement
For an established 7-inch or 8-inch requirement, use the dedicated size listing to focus the fit discussion. For a double-sided construction, review the separate double-sided pad and its mounting assembly. Keep the broad range page as a selection entry point, with each actual variant described by its own dimensions and interface.
Compare supply on accepted output
When assessing samples from different suppliers, compare more than unit price. Record whether each pad fits correctly, produces the required result within the approved process and arrives with clear identification. Include any additional adapter or packaging requirement in the comparison. Avoid claiming lower operating cost until your own evaluation supports it.
A practical sample check before a larger order
Start with a correctly identified pad and an approved machine-and-mounting assembly. Choose a representative test surface and use the intended compound system according to its instructions. Record the initial surface condition, the pad reference and the complete finishing sequence. Inspect the result after the process is complete, including any planned refinement stage. Keep a reference sample or photographs under consistent lighting so the workshop and purchasing team share the same acceptance standard.
Questions to investigate when the result changes
| Observation | What to review |
|---|---|
| Finish differs between trials | Compare the incoming surface, compound, pad condition and machine setup. Change one controlled variable at a time where practical, rather than changing the entire system and losing the basis for comparison. |
| Residue or fibers obscure the result | Follow the pad and compound suppliers' cleaning and inspection instructions before judging the surface. Do not introduce an unapproved solvent or cleaning method that could affect the pad assembly. |
| Unexpected vibration or poor seating | Stop and inspect the mounting, centering and condition of the complete assembly. Resolve any mismatch or damage before continuing; increased pressure is not a way to correct an unsuitable fit. |
Buyer FAQs: ordering, samples & specs
How is this range different from the double-sided listing?
This is the general wool-pad range. Use the separate double-sided listing when that construction is required, and confirm both faces and the adapter specification.
Can I order a mixed-size assortment?
Send the required size breakdown and quantity for each item. Cornovo can review the assortment and packaging request; the quotation should identify every variant separately.
Which details should appear on a wholesale item label?
At minimum, agree a clear item reference, size, quantity and the attachment or compatibility information needed to identify the pad. Include the applicable operating markings and keep the label consistent with the actual supplied specification.
Will a wool pad leave a swirl-free finish in one step?
Evaluate the complete pad-and-compound process on the intended surface. Some processes need a subsequent refinement step. Judge the finished result rather than relying on a universal one-step claim.
Can the same pad be used with different compounds?
A change of compound can introduce carryover from the previous process. Follow the suppliers' instructions and use a clear pad-identification system. Dedicated pads are useful when the finishing stages or materials need to remain separate.
What should I include in a sample request?
Give the pad size and attachment, machine model, workpiece or coating, compound system and target result. Add the quantity and destination, and identify whether you need a pad alone or a complete mounting assembly.
Request a sample or a defined wholesale quotation
Send your required size and mounting details, workpiece material, finish target and machine model. If replacing an existing item, include its marking and front, reverse and side photographs. State the sample quantity, expected order quantity, packaging requirements and destination.
Ask for the proposed specification, included accessories, price, sample terms and lead time in the quotation. For a repeat purchasing program, keep the approved sample reference and the agreed inspection criteria with every order.
Send your requirements to Cornovo Abrasive
