Product Details
Discuss your application or request a sample
A smaller option within the sheepskin range
This 6-inch version sits below the 7-inch option in Cornovo's size range. That makes it a relevant comparison when selecting a pad for the available working area, but suitability still depends on the complete machine-and-plate assembly. Describe the panel shape or part geometry, especially where edges, recesses or adjacent fittings restrict access.
Check the attachment area independently
The working-face diameter and the attachment-area diameter are separate measurements. Record both, along with pad thickness and pile details. A pad that looks correct from the front can still have a different mounting surface on the back. Request a reverse-side view of the exact sample and keep it with the approved item reference.
Use a representative surface for the trial
A sample trial should reproduce the material, coating and initial condition that your team encounters. If evaluating automotive work, document the compound and machine setup as well as the coating. Inspect the finish after the full intended sequence. This provides a more useful decision than judging softness by hand or selecting solely by the color of the fibers.
Application scenarios to evaluate
Use these scenarios to define a sample trial; suitability depends on the supplied specification and approved process.
| Buying situation | Selection focus | Trial objective |
|---|---|---|
| Polishing within a restricted working area | Panel shape, nearby edges and complete assembly dimensions | Check access without assuming the smaller pad suits every contour. |
| Standardizing a 6-inch replacement item | Reverse-side fit and construction of the accepted sample | Maintain a distinct reference for this pad and its mounting requirements. |
Specifications and selection details
| Nominal size | 6 inches |
|---|---|
| Product color | White |
| Required dimensions | Working face, attachment area, overall thickness and pile length |
| Required compatibility | Mounting system and approved machine/plate combination |
When to compare another format
Compare the 7-inch sheepskin version if the approved setup and working area call for another diameter. Compare a different wool construction when pile and compound behavior are the main variables. For precision metal features that need a solid or mounted felt tool, use the felt-wheel range rather than treating every wool-based accessory as the same product.
Specify a repeatable replacement
If you are replacing a pad already used successfully, send a face photo, reverse photo and the known mounting dimensions. Include the compound and machine model, and identify which characteristics must remain the same. Where a substitute construction is proposed, evaluate it as a new sample rather than accepting a matching nominal size as proof of equivalence.
A practical sample check before a larger order
Start with a correctly identified pad and an approved machine-and-mounting assembly. Choose a representative test surface and use the intended compound system according to its instructions. Record the initial surface condition, the pad reference and the complete finishing sequence. Inspect the result after the process is complete, including any planned refinement stage. Keep a reference sample or photographs under consistent lighting so the workshop and purchasing team share the same acceptance standard.
Questions to investigate when the result changes
| Observation | What to review |
|---|---|
| Finish differs between trials | Compare the incoming surface, compound, pad condition and machine setup. Change one controlled variable at a time where practical, rather than changing the entire system and losing the basis for comparison. |
| Residue or fibers obscure the result | Follow the pad and compound suppliers' cleaning and inspection instructions before judging the surface. Do not introduce an unapproved solvent or cleaning method that could affect the pad assembly. |
| Unexpected vibration or poor seating | Stop and inspect the mounting, centering and condition of the complete assembly. Resolve any mismatch or damage before continuing; increased pressure is not a way to correct an unsuitable fit. |
Frequently asked questions
Is a 6-inch pad the same as a 6-inch backing plate?
Not necessarily. Pad and backing-plate dimensions must be checked separately with the product and machine instructions.
Can it be used on painted surfaces?
Evaluate the exact pad-and-compound system for the coating and machine involved. Assess a representative test area before treating a finished panel, and include the complete finishing sequence in the trial.
Is this automatically a better choice for every small panel?
No. Panel access depends on the whole assembly, including backing plate and machine. Choose an approved setup that can work within the available area and evaluate the result on the intended surface.
Will a wool pad leave a swirl-free finish in one step?
Evaluate the complete pad-and-compound process on the intended surface. Some processes need a subsequent refinement step. Judge the finished result rather than relying on a universal one-step claim.
Can the same pad be used with different compounds?
A change of compound can introduce carryover from the previous process. Follow the suppliers' instructions and use a clear pad-identification system. Dedicated pads are useful when the finishing stages or materials need to remain separate.
What should I include in a sample request?
Give the pad size and attachment, machine model, workpiece or coating, compound system and target result. Add the quantity and destination, and identify whether you need a pad alone or a complete mounting assembly.
Request a sample or a defined wholesale quotation
Send your required size and mounting details, workpiece material, finish target and machine model. If replacing an existing item, include its marking and front, reverse and side photographs. State the sample quantity, expected order quantity, packaging requirements and destination.
Ask for the proposed specification, included accessories, price, sample terms and lead time in the quotation. For a repeat purchasing program, keep the approved sample reference and the agreed inspection criteria with every order.
Send your requirements to Cornovo Abrasive
