Product Details
Discuss your application or request a sample
A 7-inch size choice should begin with machine fit
A nominal pad size describes the product range; it does not certify compatibility with every polisher sold under the same size label. Compare the pad's attachment area with the plate and check the approved assembly. This is particularly useful when sourcing a replacement from a different supplier, where two pads with similar names may have different backing dimensions.
Look beyond the face photograph
The white face is the part customers recognize first, but the reverse and edge views answer the fit questions. A side view helps establish the pad profile, while the reverse shows the attachment area. For a repeat order, keep these views with the approved specification. This prevents an attractive face photograph from concealing a change in construction or mounting.
Plan the work around access and surface condition
For panel polishing, describe the working area, nearby edges and the starting condition of the coating. If the 7-inch assembly limits access, assess a smaller approved setup rather than forcing the pad into a restricted area. If the surface needs a separate refinement stage, include that stage when evaluating the finish. Assess the completed process, not just the appearance immediately after compounding.
Application scenarios to evaluate
Use these scenarios to define a sample trial; suitability depends on the supplied specification and approved process.
| Buying situation | Selection focus | Trial objective |
|---|---|---|
| Replacing a 7-inch pad in an existing process | Attachment, pile, backing and compound | Match fit before comparing surface results. |
| Comparing 6-inch and 7-inch assemblies | Approved machine configurations and panel access | Evaluate handling and finish on comparable surfaces. |
Specifications and selection details
| Nominal size | 7 inches |
|---|---|
| Product color | White |
| Required fit details | Actual pad diameter, mounting-side dimensions and attachment |
| Process details to provide | Polisher model, compound, coating or workpiece and finish target |
7-inch sheepskin pad versus 7-inch cream wool pad
Cornovo also has a cream-colored 7-inch wool-pad listing. The shared size does not prove the two pads have the same pile, attachment or behavior. Compare their actual specifications and sample results with your chosen compound. Keep them as separate items in a purchasing system until interchangeability has been established.
Compare 6 and 7 inches without changing the test
When trialing both sizes, use approved machine setups and comparable surface conditions. Record the practical differences in access, handling and final appearance. A comparison that also changes the compound or incoming surface cannot isolate the effect of the pad choice. Build the selection around the job, rather than assuming that one diameter is better for every panel.
A practical sample check before a larger order
Start with a correctly identified pad and an approved machine-and-mounting assembly. Choose a representative test surface and use the intended compound system according to its instructions. Record the initial surface condition, the pad reference and the complete finishing sequence. Inspect the result after the process is complete, including any planned refinement stage. Keep a reference sample or photographs under consistent lighting so the workshop and purchasing team share the same acceptance standard.
Questions to investigate when the result changes
| Observation | What to review |
|---|---|
| Finish differs between trials | Compare the incoming surface, compound, pad condition and machine setup. Change one controlled variable at a time where practical, rather than changing the entire system and losing the basis for comparison. |
| Residue or fibers obscure the result | Follow the pad and compound suppliers' cleaning and inspection instructions before judging the surface. Do not introduce an unapproved solvent or cleaning method that could affect the pad assembly. |
| Unexpected vibration or poor seating | Stop and inspect the mounting, centering and condition of the complete assembly. Resolve any mismatch or damage before continuing; increased pressure is not a way to correct an unsuitable fit. |
Frequently asked questions
Will this fit every 7-inch polisher?
No universal fit is established. Confirm the attachment, backing plate and machine's approved pad range for the exact model.
Can I compare it with the 6-inch version?
Yes. Request dimensioned specifications and samples of both. Compare fit and finish using the intended machine and compound, rather than assuming size changes alone determine the result.
What information helps distinguish this pad from another 7-inch pad?
Provide the attachment type, attachment-area dimensions, pile construction, overall thickness and machine model. These details are more reliable identifiers than a white face and a nominal diameter alone.
Will a wool pad leave a swirl-free finish in one step?
Evaluate the complete pad-and-compound process on the intended surface. Some processes need a subsequent refinement step. Judge the finished result rather than relying on a universal one-step claim.
Can the same pad be used with different compounds?
A change of compound can introduce carryover from the previous process. Follow the suppliers' instructions and use a clear pad-identification system. Dedicated pads are useful when the finishing stages or materials need to remain separate.
What should I include in a sample request?
Give the pad size and attachment, machine model, workpiece or coating, compound system and target result. Add the quantity and destination, and identify whether you need a pad alone or a complete mounting assembly.
Request a sample or a defined wholesale quotation
Send your required size and mounting details, workpiece material, finish target and machine model. If replacing an existing item, include its marking and front, reverse and side photographs. State the sample quantity, expected order quantity, packaging requirements and destination.
Ask for the proposed specification, included accessories, price, sample terms and lead time in the quotation. For a repeat purchasing program, keep the approved sample reference and the agreed inspection criteria with every order.
Send your requirements to Cornovo Abrasive
